blog.tomoyo.eu
冬のブログ » OneAsiaHost: 512MB OVZ in Singapore – Review
http://blog.tomoyo.eu/oneasiahost-512mb-ovz-in-singapore-review
Laquo; Pretty permalinks and playing with xenForo. OneAsiaHost: 512MB OVZ in Singapore – Review. Maybe I should replace SSHD with Dropbear, hmm. Hey there folks,. As usual, been a while since the last post. My theoritical exams finished today, actually. I have some unexpected free time tonight and stumbled over an opportunity to test a VPS in neighboring SG for free. Well, I’ve never been one to turn down free (and appealing too! Offers like these, so here goes nothing. Leaving that aside, this plan come...
h3cas.com
H3C交换机静态路由典型配置 | H3C交换路由技术网
http://www.h3cas.com/h3c交换机静态路由典型配置
Release 6100系列,Release 6300系列,Release 6600系列,Release 6610系列. Release 5301,Release 5303,Release 5306,Release 5309. System-view [SwitchA] ip route-static 1.1.3.0 255.255.255.0 1.1.2.2 [SwitchA] ip route-static 1.1.4.0 255.255.255.0 1.1.2.2 [SwitchA] ip route-static 1.1.5.0 255.255.255.0 1.1.2.2. System-view [SwitchC] ip route-static 1.1.1.0 255.255.255.0 1.1.2.1 [SwitchC] ip route-static 1.1.4.0 255.255.255.0 1.1.3.2. 在主机A上配缺省网关为1.1.5.1。 在主机B上配缺省网关为1.1.4.1。 在主机C上配缺省网关为1.1.1.1。
h3cas.com
802.1X下Guest VLAN、动态VLAN下发典型配置 | H3C交换路由技术网
http://www.h3cas.com/802-1x下guest-vlan、动态vlan下发典型配置
Raquo; 802.1x. Raquo; 802.1X下Guest VLAN、动态VLAN下发典型配置. 用户Host 已安装iNode 802.1X客户端软件 通过交换机的端口GE1/0/1接入网络。 如果Host一段时间未发起802.1X认证或认证失败,端口将被加入Guest VLAN10 中,此时Host可以访问VLAN10内的Update Server,通过Update Server进行下载或升级802.1X客户端等操作。 分析组网需求可以发现,用户Host存在三种状态 初始状态 也可以看作是用户正常下线状态 、用户未进行认证或认证失败状态和用户认证成功状态 不同状态下用户的权限不同。 在GE1/0/1上开启802.1X功能,设置VLAN 10为端口的Guest VLAN,当设备从端口发送触发认证报文 EAP-Request/Identity 超过设定的最大次数而没有收到任何回应报文后,GE1/0/1被加入Guest VLAN中,此时Host只能访问Update Server 升级服务器可用于下载802.1X客户端 ,如下图所示。 Switch] domain system [Switch-i...
h3cas.com
BPDU Tunnel典型配置 | H3C交换路由技术网
http://www.h3cas.com/bpdu-tunnel典型配置
Raquo; BPDU Tunnel典型配置. 用户网络 A 的私网VLAN 为VLAN 1 10,用户网络B 的私网VLAN 为VLAN 1 20,运营商网络边缘设备Device A 和Device B 连接用户网络的端口上开启了基本QinQ 功能,用户网络A 和用户网络B 的分支机构分别通过运营商网络的VLAN 100 和VLAN 200 进行通信. 现要求使用 STP 协议的BPDU Tunnel 功能实现. 图1 BPDU Tunnel 组网示意图. 在端口上使能 STP 协议的BPDU Tunnel 功能之前,必须在该端口上关闭STP 功能。 请确保 BPDU 报文在运营商网络中进行透明传输的过程中,BPDU 报文携带的VLAN Tag 不. 配置端口GigabitEthernet 1/0/1 加入VLAN 100。 使能端口GigabitEthernet 1/0/1 的基本QinQ 功能。 在端口GigabitEthernet 1/0/1 上关闭STP 功能,并配置该端口对STP 协议的BPDU 报文进行透. 配置端口GigabitEthernet 1/0/2 加入VLAN 200。
h3cas.com
H3C交换机路由策略典型配置 | H3C交换路由技术网
http://www.h3cas.com/h3c交换机路由策略典型配置
路由器在发布与接收路由信息时,可能需要实施一些策略,以便对路由信息进行过滤,比如只接收或发布一部分满足给定条件的路由信息 一种路由协议 如RIP 可能需要引入 import 其它的路由协议 如OSPF 发现的路由信息,从而丰富自己的路由信息 路由器在引入其它路由协议的路由信息时,可能只需要引入一部分满足条件的路由信息,并对所引入的路由信息的某些属性进行设置,以使其满足本协议的要求。 Switch A的Router ID为1.1.1.1,Switch B的Router ID为2.2.2.2。 配置路由策略,在引入静态路由时应用该路由策略,使三条静态路由部分引入、部分被屏蔽掉 20.0.0.0和40.0.0.0网段的路由被引入,30.0.0.0网段的路由则被屏蔽。 SwitchA] route-policy ospf permit node 10 [SwitchA-route-policy] if-match acl 2000 [SwitchA-route-policy] quit. System-view [SwitchB] interface vlan-interface 100 [SwitchB-Vl...
h3cas.com
802.1X客户端EAD方案典型配置 | H3C交换路由技术网
http://www.h3cas.com/802-1x客户端ead方案典型配置
Raquo; 802.1x. Raquo; 802.1X客户端EAD方案典型配置. 某公司的用户主机通过接入设备Switch连接网络,目前为部署EAD解决方案,需要用户安装802.1X客户端,由于网络中的用户主机数量较大,为减小网络管理员安装客户端的工作量,在192.168.2.0/24网段布署一台DHCP服务器为客户端动态分配IP地址,一台WEB服务器 IP地址为192.168.2.3 提供客户端软件下载 要求. 未进行802.1X认证或认证失败的用户,只能访问192.168.2.0/24地址段 可以通过DHCP服务器动态获取192.168.0.0/24网段的IP地址。 L 配置802.1X认证的Free IP网段. Release 6100系列,Release 6300系列,Release 6600系列,Release 6610系列. Release 5301,Release 5303,Release 5306,Release 5309. System-view [Switch] dhcp enable. Switch] dot1x free-ip 192.168.2.0 24. 本站为非盈利性个人...
h3cas.com
MSR路由器L2TP多实例典型配置 | H3C交换路由技术网
http://www.h3cas.com/msr路由器l2tp多实例典型配置
如图1所示,Router A作为PPPoE的Client端和L2TP的User,Router B同时作为LAC和PPPoE server,Router C作为LNS,要求 采用本地认证的方式,使不同的用户能够不受干扰地访问各自的企业内网。 System-view [RouterA] interface serial 7/0/1:1 [RouterA-Serial7/0/1:1] ppp pap local-user rad@rad password simple rad [RouterA-Serial7/0/1:1] ip address ppp-negotiate [RouterA-Serial7/0/1:1] quit [RouterA] interface serial 7/0/2:1 [RouterA-Serial7/0/2:1] ppp pap local-user hws@hws password simple hws [RouterA-Serial7/0/2:1] ip address ppp-negotiate [RouterA-Serial7/0/2:1] quit. RouterB]...
h3cas.com
H3C交换机OSPF基本配置 | H3C交换路由技术网
http://www.h3cas.com/h3c交换机ospf基本配置
开放最短路径优先协议 Open Shortest Path First,OSPF 是IETF组织开发的一个基于链路状态的内部网关协议,目前使用的是版本2 RFC2328。 如上图所示,Switch A、Switch B、Switch C和Switch D之间通过OSPF协议进行数据报文的转发。 System-view [SwitchA] ospf 1 router-id 1.1.1.1 [SwitchA-ospf-1] area 0 [SwitchA-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255 [SwitchA-ospf-1-area-0.0.0.0] network 10.1.2.0 0.0.0.255 [SwitchA-ospf-1-area-0.0.0.0] quit [SwitchA-ospf-1] quit. 配置Switch B 请参见Switch A配置. System-view [SwitchC] router id 3.3.3.3. SwitchC-ospf-1] area 0 [SwitchC-ospf-1-area-0.0...
dnmin.com
Status | DNMin (Beta)
https://dnmin.com/status
A free domain management tool. DNMin queries Whois information from multiple servers. I called these servers as workers. If you are curious about workers health, you can check their status below:. By clicking on the "Create Account" button, you agree to our Terms of Service. Don't have an account? Sign Up for free account.
SOCIAL ENGAGEMENT